Jane Richard

Sewing Pattern Besace Bag Palerme - PDF

€7.90

The patron of the Palermo Bag is a model that is both very feminine, design and functional. It can be worn by hand or over the shoulder. You can therefore choose to make the handle and the shoulder strap or just one of the two.

Its dimensions will allow you to insert everything you need for your daily life.

It has an interior zip closure along its entire length and 2 zipped pockets, inside and outside.

The flap is closed with a turnstile and the shoulder strap is obviously adjustable to your stature.

Let your creativity run free in the choice of materials and colors to give it the look that sticks to your skin!

To find out more about Le Patron du Sac Palerme, do not hesitate to visit the dedicated blog article → https://janeemilie.com/2020/02/20/le-sac-besace-palerme/

You will immediately receive by email:

- PDF A4 pattern (seam allowances are included)

- The detailed and illustrated production guide

Quantity

Add to wishlist

Secure payment

Immediate sending of the PDF Sewing Pattern

98% of customer satisfaction rate with Wissew

Nice sewing time with your new pattern

The supplies you will need:

Fabric 1 - H57 cm x L64 cm

Reinforcement Fabric 1 - according to your choice: Decovil light: same yardage as fabric 1 OR Vlieseline G700 + mesh foam: same yardage as fabric 1

Fabric 2 - to be adapted according to whether you make your straps and piping yourself: ➢ H40 cm x L140 cm if you make your straps and piping yourself OR H33 cm x L130.5 cm if you use imitation straps and “ready-to-use” piping.

Fabric 3 - H41.5 cm x W118.30 cm

Vlieseline G700 for fabric 3 - H60 cm x L90 cm

1 zipper of 20 cm for the outside pocket

1 zipper of 20 cm for the inside pocket

1 zipper of 25 cm for the inner central closure of the bag

1 turnstile clasp

2 jumpers jumpers

2 carabiners with ring - 25 mm loop

2 double tang buckles - 25 mm loop

1 sliding buckle - 25 mm loop

4 end pieces of 25 mm strap 6 rivets including 2 for the handle, 2 for the flap and 2 for the shoulder strap

Double-sided tape with a maximum width of 6 mm

Matching yarn (s)

Adapted needles

⚠️If you make your thongs and piping yourself in fabric 2:

Bundfix or Perfobande width 7 cm = 222 cm including 140 cm for the shoulder strap, 22 cm for the handle and 2 times 30 cm for the flap straps.

Cord for piping = 179 cm including 2 times 57 cm for the sides of the bag and 1 time 65 cm for the flap.

⚠️If you prefer to use faux leather strap and ready-to-go piping:

Imitation leather strap = 222 cm including 140 cm for the shoulder strap, 22 cm for the handle and 2 times 30 cm for the flap straps.

Piping = 179 cm including 2 times 57 cm for the sides of the bag and 1 time 65 cm for the flap.

What fabrics to choose for this work?

Here are the materials that I recommend for this project. If you want to change it for fabrics with a more or less important weight, be sure to adapt your interlinings ...

Fabric 1: Medium to heavy and non-stretch fabric: Tweed, woolen cloth, velvet, suede, suede, nubuck ...

Fabric 2: Medium to heavy, non-stretch fabric: leather, imitation leather, cork, etc.

Fabric 3: Light to medium fabric: cotton canvas, cotton ...

Find out the FR - UK - US size correspondence chart in Attachments.